Mystery gifts from oil pan.

Discussion in 'Mack Forum' started by BoxCarKidd, Sep 25, 2019.

  1. BoxCarKidd

    BoxCarKidd Road Train Member

    4,167
    5,981
    Aug 26, 2014
    0
    Mack E7? 2004 CX613 ser 023140. We find no place for them in the crankcase or under the valve cover. Does any one know where these came from. IMG_20190925_111708312.jpg IMG_20190925_111743010.jpg
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. buddyd157

    buddyd157 Road Train Member

    13,439
    34,299
    May 25, 2017
    under a shade tree
    0
    the piece of paper, came from a pad, that came from a tree.

    the penny came from the U.S. Mint.

    the locking snap ring may be from a wrist pin..???

    can't say about the brass pieces..
     
  4. d281833

    d281833 Heavy Load Member

    880
    918
    May 15, 2012
    0
    Somebody's pocket
     
    Bakerman Thanks this.
  5. AModelCat

    AModelCat Road Train Member

    27,626
    144,548
    Jul 7, 2015
    Canuckistan
    0
    Its an external snap ring so doubt its from a wrist pin. What about from a rocker shaft? Brass looks like a bushing, looks to be similar in diameter as the snap ring. Maybe a bushing from the rocker shaft?
     
  6. BoxCarKidd

    BoxCarKidd Road Train Member

    4,167
    5,981
    Aug 26, 2014
    0
    Way to small in both cases.
    Did just replace the fuel supply pump. Was leaking oil inthe crankcase. Bushing is to large for that shaft as well as the centrimax filter.
    Engine does not have jakes.
     
  7. BoxCarKidd

    BoxCarKidd Road Train Member

    4,167
    5,981
    Aug 26, 2014
    0
    Ha Ha
     
  8. BoxCarKidd

    BoxCarKidd Road Train Member

    4,167
    5,981
    Aug 26, 2014
    0
    Turbo? Appears fine.
     
  9. rolls canardly

    rolls canardly Road Train Member

    1,456
    2,750
    Feb 7, 2009
    mt. pocono. pa.
    0
    U have a puzzle, my friend.
    Get out the Vernier calipers, and measure ID of the external Snap ring.
    Also draw the guesstimated diameter the radius of the brass pieces give you.
    Between the oil pan and top of your motor there is a lot of real estate,
    but narrow it down with Dimensions U come up with from measurements, and type of Matl.
     
    BoxCarKidd Thanks this.
  10. Snoopycda

    Snoopycda Medium Load Member

    349
    682
    Jan 22, 2016
    Edmonton Ab.
    0
    Valve keepers and a snap ring from a rocker perhaps?
     
    BoxCarKidd Thanks this.
  11. truckdriver31

    truckdriver31 Road Train Member

    6,985
    8,340
    Sep 18, 2013
    0
    baldwin filters all day long
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.