Hey guys,
So I got a 15’ WS 4900 EX with a DD16 and 18 spd
Truck is 600hp 2050 torque deleted and tuned +15% so close to 700hp.
My question is, can I do anything with boost sensor to make it snort a little black smoke when I’m accelerating? Like the old 60 series? I got the noise and the pipes just missing the smoke if you know where I’m coming from!
Thank you!
2015 Detroit DD16 fuel/boost mods
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by 4900ex, Nov 26, 2019.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Trolling ...
-
alds and lovesthedrive Thank this.
-
You can't wash down a cylinder without over fueling it and smoking!lovesthedrive, KB3MMX and stillwurkin Thank this. -
Duct tape up half of your air filter.
alds, lovesthedrive, KB3MMX and 4 others Thank this. -
Thanks boys! I appreciate it
-
If your working that truck. Dont plan to operate it anywhere that has emission requirements. Rolling black coal smoke will get you pulled over toot sweet!
However, you might try asking at a diesel performance shop. I would not be surprised if there was a programmer available for you to retrofit the engine to roll coal. But your mileage is going to SUCK! Like 2 mpg suck.alds Thanks this. -
Plan to change your oil a lot more frequently.
All that extra soot getting onto the crankcase is like throwing sand on your bearings.alds Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.