Wish I had thought to take a picture. Went to pull on the county road that nucor is on, and some idiot had the intersection all screwed up with his load of beams smashed up into the back of his sleeper. It's barely 500 yards from their drive way to that stop sign. What a freaking tool.
The Truckers’ Report flatbed Hall of Shame.
Discussion in 'Flatbed Trucking Forum' started by MACK E-6, Dec 11, 2017.
Page 264 of 684
-
stwik, Rickp, PoleCrusher and 4 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
That’s pretty bad.PoleCrusher, misterG, cke and 1 other person Thank this. -
Last edited: Feb 5, 2020
PoleCrusher, MACK E-6, cke and 1 other person Thank this. -
-
I saw a guy towing a similar size mini excavator. He had a chain around the blade pulling front, only problem was the blade was in the raised position. Oh yeah and nothing on the rear.
A while back I stopped in a local tire shop, noticed some putz with a skid steer on a trailer with grossly under inflated tires. I thought "well at least he's getting them taken care of". When I came out of the office they were using a bead cheeah on the skid steer !! Then I noticed the bucket full of concrete slabs and no securement on rear, he had a chain over the bucket though. They did inflate tires on trailer so I guess he was good to go. You can't fix stupid but a concrete slab or flying skid steer may. -
Well its me again in the hall of shame today.. Doing my first oversize load. it all started off legal enough until i got TQL'd at old castle mulch near atlanta.
the southeast is flooding out bad so anything without a tarp is going fast. Took me probably 3 hours to bind this trainwreck down in a monsoon. I shoulda just told them to forget it. No more bag mulch for me.
The noob loader on my driver side just plain sucked. Cant see a thing behind me no matter how much i cross strap it. Got screens ontop and everything, cant get it pulled back in.
-
...btw thats not a load shift.. The pallets are just too fat. Centers are all touching and its bound very tight.
MACK E-6 Thanks this. -
-
misterG Thanks this.
-
stwik Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 264 of 684