Having a weird situation with the trailer.
The driver side amber turn signal doesn't turn on with every other light, but it works/blinks once the turn signal is activated.
The passenger side turns on, stays on, and blinks when signal is activated.
Have you experienced this before?
Currently confused on which one working correctly!
Trailer light wigging out
Discussion in 'Expediter and Hot Shot Trucking Forum' started by DouletTheDriver, Feb 7, 2020.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
The passenger side is working correctly. Remove the light from the pass side and replace the driver side. If it works go buy another light.
flood, singlescrewshaker and DouletTheDriver Thank this. -
There should be a ground, power, and a blinker wire.singlescrewshaker Thanks this. -
Well now that it’s dark and I made a left turn, I noticed that when I apply the brakes, the light turns on. So I’m thinking the bulb is good and it’s an electrical issue.
I tried the rear port on the truck, still nothing so definitely the trailer
I’ll try to figure it out over the weekend.singlescrewshaker Thanks this. -
If they are not led, the dim filament (marker) is probably just burned out. If they are led, you may just have a defective light, wiring, or bad connection..
Do what @Slay said & swap lights with known working one to see if it's just the light fixture itself.. -
X2 the amber lights on the side shine solid when I apply the brakes
singlescrewshaker Thanks this. -
Yeah I have the Load trail. It was the light. Switched it out, now they both are always on.
I don’t like it because it makes the blinking not very noticeable when looking at it.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.