I use to use Rand McNally and PC.
It kept track of miles automatically.
Fuel you had to enter amount and gallons purchased but Rand would give...
Haven't seen a cab over in a while.
I know what you are talking about steering.
I see it all the time with tagalongs pulling skid steers, mini excavators,dump trailers and etc. with...
Not meant to be argumentative, just for sake of disscussion.
I pulled a 50' kaufman wedge for a while and never had a problem of not being able to...
How do air bags move weigh to
How do air bags on the rear move weight to the front.
I thought the only to shift weight to the front or rear was...
I don't know what they are looking for now.
I have been building houses and toeing some equipment (skid steer, mini excavator and materials).
The shorter distance you can get from ball or fifth wheel to trailer the better off you will be.
Turning to fast will get you in trouble quick.
I think leaving the 25k on the trailer would be to your advantage.
The more weight you can put on the trailer axles the better it will be for...
Yes it was Kaufman's standard 50' 3 axle wedge, no extras.
I don't know what the 3 axle low pro weighs.
Scales do vary some.
That same trailer...
You'll be fine with what you got.
It will give you a chance to see and learn what the business is all about.
Here are the scale tickets for the...
If you can get out of the trailer you ordered I would and buy the 50' kaufman.
It only weighs approx. 5600 lbs and is rated for 18k.
I ran a used...
I just googled it.
Been getting them sense 2014.
Ram body builder site has the same information.
The numbers are close.
Base weight 7723
Look at the last line.
That will give you all the info you need.
I could be off some on numbers.
It's hard to get exact off the tachometer @ speedometer on the truck.
The tires are 11R24.5's . I know it's a 411...
I ran the same route today at 1400 rpm at a speed of 58 mph.
It got 8.2. At this point I'm thinking only 6/10's mpg, it's probably not worth the...
I would like to see 8 mpg.
I don"t think its going to happen with this truck.
I ran 115 miles today bobtail an got 7.6 @ 1600 rpm and 65 mph.
Sorry for the previous post. I'm computer illiterate today.
475 hp @ 1700 rpm,
1700 lb-ft torque @ 1000 rpm
.73 final drive ratio per...