you can ask to have an adjustable clutch put in that way if you float gears you self adj. clutch will not get stuck and need to replace it...
that indicator means there is a fuel pressure drop in the truck, this is the way truck is programmed to give you change fuel filter light,...
Possible maybe turbo
The funny thing now is that before Fed Ex had to ask the contractor for the footage only if there was an accident otherwise they did not have...
6306078889
Depends if you want turbo and injectors. I usually charge around 4000 for labor and whatever parts are usually around 15 k but depends how deep u...
you can not do it i would highly not suggest doing it.
Copper can only be installed with the pull thru tool never have I tried using the push tool so I couldn’t tell you if usable or no.
There is supposed to be three doors yes.
The best part with copper is that you can replace just the cups and don’t need to replace injectors with stainless you have no choice I would...
You won’t be able to see the gears you can feel around when looking at panel left hand corner towards front of can you should feel the plastic...
You have to remove the Passager side panel and the ducts the gearing for the motor fell off and blend doors not working properly need to time the...
D13 and 16 are tandem pumps power steering and fuel pump into one, fuel pump rarely goes bad power steering does a little more often. If you think...
The brown wire is what gives the trailer module signal to say brakes are being applied memory serves me correctly that should go to the brake...
remove the nut lift up compressor by gear and wack the shaft or use an extractor and it will pop out make sure you use locktite when you put it...
What it sound like to me is either brake pedal sensor is off and something is not working properly with this or clutch actuator is going also...
I can fix the reving problem making speedo work is doable but. Not cheap need new vecu I’ve done this job 3 times will never do it again. Pain in...
Your will not damage anything if they don’t want to go just use a map torch and they will come right off.
Yes this would be the one there is no way if you strip it with this wrench you are definately not made to work on trucks or on cars for that matter.
No it is not closed end not open ended need to look at oex+ flank drive wrenches 15 mil.
