2016 Volvo with 380k miles.
Truck not being used. After warming up and selecting D, it starts in 1st gear and won’t shift until I manually press...
No dust shields, hammered under the truck, outside through the rim holes with a winch bar and a hammer. That thing just won’t release. Waiting for...
If S cam is turned over, would the upper brakes still operate? Thanks for all the replies
Also, since upper brakes aren’t stuck I’m assuming relay/quick release valve is fine
Just on one side of the axle and only lower brakes are stuck/seized. Upper brakes are fine
Was hammering it for hours for two days (with brakes...
Look into Great Dane combo flatbeds, we have them and it has no arch that is visible to the eye. At least 2014 trailers didn’t
Use fully synthetic oil
So just curious, what’s the minimum rate per mile that you’d go out of Los Angeles to let’s say TX/KS/OK area?
There’s also Vander Haags, I recommend them
How much was the damage?
Does anyone know a good front end shop in East Coast area (PA, NJ, NY, CT)?
Go for it
What do you mean by 4% margin by the whole year?
How many miles have you ran in each of these years, if you don’t mind me asking
You guys forgot to mention most important question is what’s Longhaul’s average gross per week and how many miles
Call few thermoming shops, they are usually helpful
What trailer will you be pulling
I still use dunnage (rarely though, and we do not haul coils) that came with the trailer I bought from retiring cowboy trucker from Oregon in...
3D printer for Boeing
[ATTACH] [ATTACH] [ATTACH]
If you’re going to be buying new fridge Alex, make sure you get extended protection plan. Vibration make them go out, and protection plan will...