i get leaks in the cab but they seem to come from the doors, never noticed anything from the windshield. those relays are cheap enough tho i...
ya its very odd truck just cranks and cranks. i ran a toggle to the battery and starter prongs on the ign switch. if i touch those 2...
i have not i will check that out over the weekend. as far as the gauges...i guess im an idiot and while messing around with the fuses i never...
aaaaand....lol after checking fuses and stuff now my temp gauge is reading completely wrong and my battery gauge is reading completely dead....
its new, but i ordered a new one to see if maybe it was defective. but to me it still doesnt explain why the accessory stud loses power when i...
i ordered an electrical diagram book for this truck but wont be in until next week. ive looked everywhere but dont see where this stuff grounds....
new ignition switch and no change. ive been playing with a test light with the wires behind the dash and found some weird stuff. the big relay...
bump on this. i hard wired a toggle to keep those 2 wires touched, but i would like to solve the original issue. i changed out the huge relay...
i have not...but this is the background with this ignition switch.. Start up problems long story short, lost my keys, replaced ign switch...may...
i dont have a wiring diagram here. im starting to wonder if its something to do with my key switch? it almost seems like its everything that...
94 international 9400 weird intermittent problem here. sometimes the radio, windshield wiper, and passenger power window switch will not...
Is there a way to align these old doors on a 94 9400? i put on a different door on the passenger side and the bottom is pretty flush but flares...
my 9400 has always had a stiff clutch. u should see my left leg compared to my right.......
i used PAI on my N14. 4 years later zero problems. they seem like a pretty good brand, and a decent price compared to my cummins dealer stuff....
well heres the update. never tried that cam sensor. but, had a friend who was thinkin the same as me....thinking its a wiring problem....
well im on way to return a check valve i didn't use, i will pick up a new cam sensor and see what it does. i unplugged it and didnt see oil in...
wouldnt it shut down if it was cam sensor? when it was throwing a code earlier this year the truck would turn on but stumble and die after a few...
im wondering if the cam sensor could cause this? i mean..i did put a new one and coolant sensor back in February this year. the coolant sensor...
#### so thats not going to be my problem.
thats what im thinking...they just look like regular fittings.
