I do not know about that. However I can buy the same Cummins parts from the truck dealers for less.
There were only a few of those engines here in Petes. Our largest problem was the oil consumption messing up the exhaust after treatment system....
To be like new you need a chassis control module on the frame behind the transmission. Fuses to power that up behind the LF tire. That connects to...
Wow! I need a bigger wrench.
If you tighten the nut and the yoke has anything over almost no play you probably have bigger problems. We use a 1 inch impact and a 2 & 3/4...
I have had good luck with Bepco products.
Some interesting points there that I never thought about. I saw Mack Ultra Liners that the axles had odd offsets. The tire mileage on those was...
That kind of thing is common on bolts in A/C aluminum parts. Wonder if the factory uses anti seize?
When it is all wacked up and you leave the key on an old test light with a light bulb can do wonders. Battery ground to frame. Frame to engine....
That is a good question. I always used standard plate. Hardened plate does not cost a lot more. It would wear longer. The frame work above the...
No they are different. Pipe thread on one side and 5/8's or 3/4's hose barb on the other side. They come with the knob on different sides of the...
Just curious. Saw an old P/U done that way and it was awesome. I have never done a project as involved as yours. Thanks for the pictures and press...
Cool! Polished aluminum firewall?
Years ago if we had a truck with a bad crank or block we we buy a used engine from Kerns Truck Parts in Atlanta. ( I am not affiliated ) They buy...
On our truck ( day cab ) it was a corroded connector behind the right door. Behind the panel at floor level. I have read of others having...
I would thank you were somewhere that you ran over an obstacle. Backing to a dock and did not notice the offset concrete slab sections type thing....
Maybe check fuse - breaker and switches.
One local shipper rejected any trailer with visual light inside with closed doors. They would fudge a little for door seals but nut much. Some...
Need more information.
And how are you flushing it? In Florida you would need to be in a facility with a recycle waste water loop. I do not have that problem but try...
