Working on a star right now. I do like many things about it. There are some well thought out design features. First time playing with one.
So, at the spedo we have battery power but no ignition power. There is a good ground with no back feed from anywhere. On pin 4 with the lights on...
Had the #### plug backwards. From the schematic . Managed to get photos of the plugs in just the right light...[ATTACH] [ATTACH]
Data star corrections. Pin 1 & 6 should have ignition power from spl-20 fed by fuse f-20. I'll check the fuse in the morning.
Spl 4-0 is my problem area.
I numbered them before I had a schematic. Now I have another photo and have relabeled them but didn't post it yet
Update for anyone needing info.[ATTACH]
Have an o5 doing some strange gauge stuff. Anyone have electrical schematics so I know what to look for. What I have so far is this:
That's what I will be suggesting.
#1 is out of spec. Discovered the liner flange cracked
We were getting ready to drop a liner I'm guessing cause that sure looks cracked to me.
Well, hell. The results are in...
We are out on #1 surprisingly. Something is going on with that liner flange. The closer you get to...
Cross hatch looks great and pistons are tight.
This is one of them fancy 6nz cats. Not fond of the w900 ... too much stuff in my way compared to a pete[ATTACH]
Best I could come up with
I will let the guy with the wallet know his options before parts go back on for sure.
There is no way I'll be allowed to pull the liners without justification. Liner projection will have to be bad. There was no antifreeze in the...
Zoom, zoom, zoom and there she is. The obvious...[ATTACH]
So, what's the best way to clean a block with the liners still in? Just scrape...