From one detachable gooseneck low boy manufacturer to another are any of the spreaders interchangeable? Are they easily modified?
In general if it isn't easy it doesn't get done. Cardboard and carpet aren't easy. Moving blankets won't last.
It doesn't have to fit...
nothing off the shelf?
Is there a mass produced, commercially made product out there to place over windows of equipment when hauling it?
We have had several variates...
It could be two separate problems though.
My T2000 has a electric problem somewhere. The odometer is intermittent, the cruise won't work, and the jake brake doesn't work.
I am so new this i shouldn't even be doing it.
Can any of these transmissions go in my truck?
I have 1998 T2000 with a Cat 3406e turned up to 550 HP. I am hauling gravel and need a lot of low end power. I need low gears.
I want to put in...
we struggled for along time and never really found anything that helped the truck out. finally i was at a BBQ with some cat mechanics...
decided it was the HPOP. replaced it and the truck runs great.
I am sorry to ask a question i am sure many have already answered but i feel i might be a unique situation and i am looking for some guidance.
i think he said the pressure was 20 psi period. not 20 psi low.
the pressure was measured using a laptop hooked to the truck and using the...
please clarify our boost pressures.
The truck is started runs fine. occasionally sputters been running for over an hour and has not died. throttle pedal has good response. the truck...
thanks. it moved while cranking.
Have a 1998 international 4700 lo profile service truck with a t444e engine. while truck was running died acted like it just run out of fuel no...
also the tach is not right. with a hand held tach we got it up to 2100 rpm but the truck tach only says 1800 rpm.
that temp is 30 degrees ambient and a ten minute idle time.
taken with a temp gun.
About 186 at the exhaust ports didn't see any smoke at all ill check the smoke again with driving it