Not sure where else to post this, so... Long story long, I replied to a truckpaper ad for an rgn at a multi-store dealer chain, that was selling...
Maybe corrosion at the ecm connections. ?Working on it and jump starting finally forced a compromised connection through the corrosion. ? When...
WOW, they answered the phone.:occasion5: TLED 4X40A is the light in question. The lady that answered I think is trained to only follow the DOT...
Thank you. I found their site. Truxaccessories. I'll try to contact them and see if they would make a chip that changes to bright amber from tail...
Not one that has both colors in separate sections of the light. I am looking for a tail light, round or oval etc., does'nt matter, that is red in...
PLEASE don't wreck it. 379 exhd. Likely cat power. I almost bet money it's an 18 speed, and it has a wet line kit.
Why not just swap engines to the old 855 big cam 3 or 4?
Ya, that's what they seem to say a lot of the time. But with 2.64 rears and no mention of the input torque rating of the trans, it can get spendy...
It will pull like 400hp should. At 80k, you'll be running your 4ways uphill. But it takes time to sit in line at the fuel pump. As the old timers...
Before I go taking stuff apart, I'll ask if there is a whistle disk or other silencing component for the turbo installed? Leaving the stock...
I'd like to help, but I dont know enough about the electronics. Disk brakes? Have you, or can you have a good look at the condition of the disk...
Siping is easier to quantify under braking. Siping has been around for a very long time, before anti-lock brakes and high hp. Modern radial tire...
06', just a muffler. Looking at the inlet piping, frame and fasteners, it MAY be original, but your truck would have to be very low miles. MXS is...
:):D Thanks, I needed that right now. Merry Christmas.
I know you're running a Cummins, but this video came up and thought it may be relevant. Youtube video of black fuel. Even though you mentioned...
Several friends and myself are wanting to know how the sleeper size is measured? I have a 2021 Pete 567 that says 80" sleeper. The box itself is...
I used to run fleetguard until I started having issues with hydraulic filter quality, then air filters showed up bent and with paper element...
Awe. Ok. That actually does make sense after watching a video about API certified DEF. They talk about storing it below 85F and out of the...
"Evaporation from super concentrating"? Vapors or are you thinking condensation like in the fuel tank where water forms?
After watching some youtube about quality, this is a very real concern to me. I may pay more, but I can't afford the cost of repair once...