The TCU was replaced today and the truck started. The low voltage crank burnt out the TCU/TCM. $7,000 lesson learned, do not crank with low...
Thank you for the helpful information Heavyd. It would be nice if the dealer could relay the information that you just did. I have seen many of...
perfect!
I have disconnected all batteries multiple times to try to reset everything, it has not helped. All cables were cleaned when the new batteries...
The slow cranking was from bad batteries. They were changed out. There is not any cranking now, and yes you are correct the neutral signal is...
Being that the ticket is not considered a moving violation, it should NOT show on your record or give you any points. I had this happen to me in...
Hello guys, Heavy D, if you are out there this is for you! I have a 2016 Prostar with the ISX15 and Eaton 10 speed Auto Trans (Push Button). The...
Hello, I have a 2016 Prostar with the Cummins ISX 15 450HP that has code SPN 102 16. This is for the Intake Manifold Intake pressure too high. I...
Also if i clear the codes using a scanner, the def guage goes back to where it should be, but 10 seconds later all codes return and the def guage...
Thank you for the help. I scanned the body control module with no codes, the engine shows nox sensor, def level sensor, def temp sensor. Something...
My son left the battery charger on the truck at 40amps overnight. Its a 16 prostar with the cummins and automatic. Immediately after this, the def...
Always nice to have company
Everyday, thats how you catch small problems before they become larger problems. Especially when it comes out of your pocket
Yes, wipe it 1st after letting the oil settle for a few minutes before checking.
Either ask your dispatcher if load can deliver early or call the receiver. Worst case, get there early and ask if they can squeeze you in
