1998 w900b cruise control

Discussion in 'Kenworth Forum' started by NickM, Dec 10, 2019.

  1. NickM

    NickM Bobtail Member

    3
    0
    Nov 15, 2019
    0
    I have just acquired a 1998 w900 with 6ts Cat. Had it hooked up to diagnostics and it said there was a issue with cruise control. Jake works perfectly. So in digging deeper the clutch switch is operational and now trying to figure out what pressure switch I need to change. There are 4 different ones behind dash and someone has made a small disaster with the wires so cant trace. Any hints or suggestions would be appreciated
     
  2. tommygun58

    tommygun58 Light Load Member

    85
    51
    Sep 22, 2015
    East Texas
    0
    I have a 99 and was having problems with my cruise kicking off. Took scotch brite and cleaned all relays and fuses. Then i cut an emery board up , narrow short pieces and cleaned all the slots for relays and fuses. Then put lite film of electrical grease on them. Crazy as it sounds, cruise works fine now.. Good luck!
     
    NickM and Bean Jr. Thank this.
  3. Bean Jr.

    Bean Jr. Road Train Member

    3,915
    5,833
    Mar 30, 2014
    0
  • Draft saved Draft deleted