2006 9400i fault code 128:F13 PID 027?

Discussion in 'International Forum' started by 9400i, Mar 2, 2014.

  1. 9400i

    9400i Bobtail Member

    32
    17
    Mar 2, 2014
    olathe,kansas
    0
    Sorry that was supposed to say fun, not phone
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Heavyd

    Heavyd Road Train Member

    7,372
    5,648
    Feb 4, 2009
    0
    90% of the time the problem is outside. I would start with that main harness from the right side of the firewall and check it inch by inch to the ECM. Don't be afraid to cut every single zip tie and unwrap all the electrical tap to inspect the wiring. The datalink is normally black pair of twisted wires. I bet you have some green somewhere!
     
  4. 9400i

    9400i Bobtail Member

    32
    17
    Mar 2, 2014
    olathe,kansas
    0
    I will probably leave work on it tomorrow when the temperatures get a little bit warmer for now I use my Garmin to keep track of my miles and time during the day. The mileage does accumulate during the day but at various times everything will zero out but when it comes back up I can see that mileage has accumulated. Thank you for your comebacks though I will look into this and have a good weekend bro
     
    Heavyd Thanks this.
  5. rickybobby

    rickybobby Road Train Member

    4,843
    6,672
    Jul 10, 2010
    greensboro, nc
    0
    I have been having the exact same problem. When it's cold or snowing my ABS light comes on. Get too warmer temps, light goes off. I don't know much about wiring. I think it's something to do with the computer.
     
  6. rickybobby

    rickybobby Road Train Member

    4,843
    6,672
    Jul 10, 2010
    greensboro, nc
    0
    I had cat look at mine they said it was the ABS modular. Going to order a new one from international when I get home. I hope this fix the problem.
     
    9400i Thanks this.
  7. 9400i

    9400i Bobtail Member

    32
    17
    Mar 2, 2014
    olathe,kansas
    0
    Thank you for your input. It has recently started being off more than on! I may look into the abs system, as it was showing fault codes previously, that I finally figured out how to clear those with the abs tester switch. But right now it is still off
     
  8. 9400i

    9400i Bobtail Member

    32
    17
    Mar 2, 2014
    olathe,kansas
    0
    Thank you for posting this link. I just bought one for the truck, and 2 of the 'E' models for the family vehicles.
    They look like they will display a lot of info that I wish I had gauges for on the cars.
    I'm still looking to find out why my 'No Datalink" stays illuminated on the big truck. I bought a used instrument cluster (tach-speedo) and it does the same thing here too. I am currently looking into a suggestion from another commentor about a relation between the ABS module,and the 'No Datalink.
    Thanks again for the link.
     
  9. 9400i

    9400i Bobtail Member

    32
    17
    Mar 2, 2014
    olathe,kansas
    0
    So here's a quick update. I put my new ScanGaugeD on my truck last week and as soon as I did
    all of my gauges on the dash came back to life. My 'NoDataLink' error message disappeared and has not been seen since! If I take it off it goes back to AFU !!
    I give the ScanGaugeD a HUGE thumbs up because of all the info I can now see and apparently it must have completed a messed up circuit,or something ???
    I also figured out that the PID descriptor in the fault message is the code you have to look up to get an idea
    for what is throwing a code. Mine happens to be a shorted/uncalibrated actuator on my VGT.
     
    Heavyd Thanks this.
  10. Traveler110

    Traveler110 Bobtail Member

    26
    1
    Feb 6, 2020
    0
    This 0434 code is a pain
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  • Draft saved Draft deleted