2011 Maxforce 9 shows no oil pressure

Discussion in 'International Forum' started by wipfa, Jan 25, 2021.

  1. wipfa

    wipfa Bobtail Member

    2
    0
    Jan 25, 2021
    0
    My maxforce 9 will start but the engine oil pressure gauge is at 0 and if i step on the gas nothing happens it stays in low idle
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Judge

    Judge Road Train Member

    3,874
    20,477
    Mar 19, 2014
    Newport, Ar
    0
    Usually if oil pressure gauge is on zero it means oil pump is out.
    Don’t know why it won’t allow accelerate, though
     
  4. ibcalm19

    ibcalm19 Heavy Load Member

    864
    1,109
    Nov 30, 2015
    Pennsylvania
    0
    More than likely the computer is in protect mode. If it isn't sensing an oil pressure it should shut the truck down. You need to find out if the sensor is bad or you have an oil pump problem
     
  5. ChuckMartel

    ChuckMartel Light Load Member

    67
    39
    Jan 22, 2021
    0
    If you had no oil pressure the engine wouldn’t start, or would start and die due to their being no pressure in the high pressure oil system. Just double check with a mechanic gauge. If that’s good check the sensor and wiring to the sensor.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  • Draft saved Draft deleted