Log in or Sign up
Forums
Forums
Quick Links
Search Forums
Recent Posts
Trucking Jobs
Truck GPS
Reviews
CDL Practice Tests
Schools
Freight Factoring
Trucking Insurance
Menu
Useful Searches
Recent Posts
More...
Find Trucking Jobs
Company Driver
Dry Van
Flatbed
Refrigerated
Specialized
Owner Operator
Regional Truck Driving
Dedicated Trucking
Tanker Driver
Solo Truck Driving
Local Truck Driving
Team Truck Driving
No Experience Truck Driving
Experienced Truck Driving
OTR Trucking
Intermodal Driver
Hazmat Driver
More Trucking Job Searches
⌄
Fewer Trucking Job Searches
⌃
TruckersReport.com Trucking Forum | #1 CDL Truck Driver Message Board
Forums
>
The Garage
>
Trucks [ Eighteen Wheelers ]
>
Commercial Truck Forums
>
International Forum
>
2013 Holiday Rambler with MAXXFORCE 10 Just Dies out of the blue.
>
Reply to Thread
Reply to Thread
Username:
Message:
<p>[QUOTE="Chris Arntz, post: 12146732, member: 331866"]Last April in the Indio Ca area, we were leaving the area and making our way home. We got about 30 miles out and all of a sudden the engine just dies. We pulled over and I notice the upside down Amber light. Through DIAG the code was SNP 679 FMI 4. I talked to a mechanic and he told be to disconnect the battery for 30 mins to clear the computer and see if it starts.. Well it stated and so we headed back to Indio. Down highway 10 it died again, and somehow using my exhaust brakes started again.. Well I made it to Dillon rd, and it died again.. So tried the same thing with the battery and got it going again.. Finally made it back to our Lot at Outdoor Resort Indio... Anyway I had a mechanic try to pin point it for a couple of times, doing test runs while he ran diags.. But never figured it out. He was able to run a Force Parked Regen, and it completed that no problem.. Anyway we ran our of time, and so we the left coach at our lot all summer.. Now we're back at Indio waiting on another mechanic to show.. He's been sick. Anyway I looked up the code SPN 679 FMI 4 - IPR Open or short to GND Fault Overview Fault code sets when Engine Control Module (ECM) detects Injection Pressure Regulation (IPR) valve frequency is less than 100 Hz. Lamp Reaction Malfunction Indicator Lamp (MIL) will illuminate when this fault is detected during one trip. Associated Faults None Fault Facts None Drive Cycle to Determine Fault Status Initial Key ON Possible Causes l IPR circuit Open or shorted to GND l IPR PWR circuit Open l Failed IPR valve</p><p><br /></p><p>So I bought a new IPR value and hoping that does the trick... But has anyone ran into this before ?</p><p><br /></p><p>Thank[/QUOTE]</p><p><br /></p>
[QUOTE="Chris Arntz, post: 12146732, member: 331866"]Last April in the Indio Ca area, we were leaving the area and making our way home. We got about 30 miles out and all of a sudden the engine just dies. We pulled over and I notice the upside down Amber light. Through DIAG the code was SNP 679 FMI 4. I talked to a mechanic and he told be to disconnect the battery for 30 mins to clear the computer and see if it starts.. Well it stated and so we headed back to Indio. Down highway 10 it died again, and somehow using my exhaust brakes started again.. Well I made it to Dillon rd, and it died again.. So tried the same thing with the battery and got it going again.. Finally made it back to our Lot at Outdoor Resort Indio... Anyway I had a mechanic try to pin point it for a couple of times, doing test runs while he ran diags.. But never figured it out. He was able to run a Force Parked Regen, and it completed that no problem.. Anyway we ran our of time, and so we the left coach at our lot all summer.. Now we're back at Indio waiting on another mechanic to show.. He's been sick. Anyway I looked up the code SPN 679 FMI 4 - IPR Open or short to GND Fault Overview Fault code sets when Engine Control Module (ECM) detects Injection Pressure Regulation (IPR) valve frequency is less than 100 Hz. Lamp Reaction Malfunction Indicator Lamp (MIL) will illuminate when this fault is detected during one trip. Associated Faults None Fault Facts None Drive Cycle to Determine Fault Status Initial Key ON Possible Causes l IPR circuit Open or shorted to GND l IPR PWR circuit Open l Failed IPR valve So I bought a new IPR value and hoping that does the trick... But has anyone ran into this before ? Thank[/QUOTE]
Your username or email address:
Do you already have an account?
No, create an account now.
Yes, my password is:
Forgot your password?
TruckersReport.com Trucking Forum | #1 CDL Truck Driver Message Board
Forums
>
The Garage
>
Trucks [ Eighteen Wheelers ]
>
Commercial Truck Forums
>
International Forum
>
2013 Holiday Rambler with MAXXFORCE 10 Just Dies out of the blue.
>
Reply to Thread