2018 579 lighting

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by truck_tech98, Jan 15, 2020.

  1. truck_tech98

    truck_tech98 Bobtail Member

    7
    3
    Nov 26, 2018
    Moncton NB
    0
    The left side signal on the hood and drivers door are working intermittently no corrosion at lights didn’t see any corrosion or chaffed areas was going to pin out the chassis node found the pin I need but the connector has no ground pin so if I’m not wrong that would mean it grounds through the module on another pin, any guiding hands out there thanks
     
  2. Goodysnap

    Goodysnap Road Train Member

    1,603
    3,051
    Jul 12, 2017
    0
    Check the hood harness over good for rubs or shorts to ground. I see alot of issues around the LH hood support/ bracket and where it wraps over and under the hood support bar near the bug screen.

    The hood harness to chassis harness connector is also common for moisture intrusion.
     
    Last edited: Jan 15, 2020
    pushbroom Thanks this.
  • Draft saved Draft deleted