9400 international cruise/clutch switch

Discussion in 'Waste Removal and Garbage Truck Driver Forum' started by smokinnoob, Feb 12, 2014.

  1. smokinnoob

    smokinnoob Bobtail Member

    3
    0
    Feb 12, 2014
    0
    jake brakes and cruise/auto idle quit working so i replaced cruise/clutch switch. jake brakes now work but still not able to set auto idle for compacting. what should i check next?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. baha

    baha Road Train Member

    4,137
    2,834
    Jul 25, 2013
    ga
    0
    Does switch let you speed up when on cruz. if no ck. switch?
     
  4. 1johnb

    1johnb Medium Load Member

    542
    405
    Jun 13, 2012
    New Paris Ohio
    0
    What year some have a switch on the drivers side firewall. Very likely that could be the culprit.
     
  5. smokinnoob

    smokinnoob Bobtail Member

    3
    0
    Feb 12, 2014
    0
    thanks,no cruz or high idle
     
  6. smokinnoob

    smokinnoob Bobtail Member

    3
    0
    Feb 12, 2014
    0
    1994 9400 International
     
  7. 1johnb

    1johnb Medium Load Member

    542
    405
    Jun 13, 2012
    New Paris Ohio
    0
    The switch I am referring to is behind the air filter on the fire wall. There is on near the outer left side and one about the center. The center one is the switc. It shou be a normally closed when air is applied (braking) it opens the circuit disengaging the pto/cruise. I can get a part number for you in the morning. Wish I would have seen the post earlier. I replaced one a month ago and had the truck back in for an air bag today.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.