Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

C-13 front structure replacement

Discussion in 'Trucks [ Eighteen Wheelers ]' started by cat13, Jan 31, 2020.

  1. Jan 31, 2020 #1
    cat13

    cat13 Light Load Member

    191
    60
    Jul 8, 2013
    Central FL
    0
    Need info, specs, tips on changing this part on a C13. Have the new one and the front structure seal/gasket kit. 20200131_205927.jpg
     
    cat13, Jan 31, 2020
    cat13, Jan 31, 2020
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Feb 1, 2020 #2
    spsauerland

    spsauerland Road Train Member

    4,296
    10,879
    May 31, 2010
    West Harrison, In
    0
    Nothing to hard, just labor intensive. Best to line up with oil change because easier with pan off. Camshaft needs to come out so I use coat hangers to hold cam followers up. If water pump is old I'd just put a reman one on. Pretty sure big idler gear bolt torques to around 340ft/lb, so need bigger torque wrench. I would set overhead since you have rockers off. Take a good look @ your radiator/CAC while it's out and blow them out good.
     
    spsauerland, Feb 1, 2020
    spsauerland, Feb 1, 2020
    #2
    swaan Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.