Cascadia 2016 code light

Discussion in 'Freightliner Forum' started by Mahertruck, Jul 22, 2019.

  1. Mahertruck

    Mahertruck Light Load Member

    227
    31
    Mar 9, 2017
    0
    I got one engine yellow light comes on for my Freightliner EVO 2016
    And the code I found it by the diagnostic option SPN 3226 FMI 13
    I'm not sure where is the problem with this code the one I have
    Can I still drive the truck to finish the Load I still need to 2000 miles to go
    I no feel the truck losing power so far
     
    Last edited: Jul 22, 2019
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. PE_T

    PE_T Road Train Member

    Type of engine? Also, post a picture of how the check engine lights look.
     
  4. tnevin225

    tnevin225 Road Train Member

    1,166
    1,600
    Jan 1, 2014
    0
    Looks like thats a voltage issue to the NOX sensor, I get those once in a while. It only take a split second of a loss or surge of power to set off a code and are generally harmless but may indicate there is a problem with a harness or maybe the ECU. See if you can clear the code and if it comes back. You should be ok to make your trip. Also did this code happen to pop up while it was raining?
     
  5. PE_T

    PE_T Road Train Member

    This “may” apply to your truck—but you may not need to do anything, depending on which check engine lights are appearing. I need to see the check engine lights, among other things that I’ll mention once I see the images.
     

    Attached Files:

  6. Mahertruck

    Mahertruck Light Load Member

    227
    31
    Mar 9, 2017
    0
    the light come in the morning when I started my truck
    The night before was okay after I finish my shift was no light
     
    PE_T Thanks this.
  7. Mahertruck

    Mahertruck Light Load Member

    227
    31
    Mar 9, 2017
    0
    dd15 Detroit Cascadia Evo 2016
     

    Attached Files:

    PE_T Thanks this.
  8. PE_T

    PE_T Road Train Member

    Did you see two check engine lights initially? Your truck seems similar to mine. On the DD15, you get two amber check engine lights. One will usually disappear in a few seconds. What you have now is just a note to the driver that a problem was detected. This light should disappear on its own after 3 driving cycles. No need to go to the dealer. If it doesn’t disappear, then go to the dealer.
     
  9. Mahertruck

    Mahertruck Light Load Member

    227
    31
    Mar 9, 2017
    0
    I hope So nothing serious ...
    But what I do with code code showing on the dash board
    SPN 3226 FMI 13 . I hope to know what the code means
     
  10. PE_T

    PE_T Road Train Member

    Just wait for 3 driving cycles, and it will probably clear on its own. If it doesn’t, then take it to the dealer. Sometimes there are mechanical and electrical glitches that occur for a few seconds and never come back. Don’t worry about those. I think each driving cycle needs to be for a certain amount of miles (maybe over 10 miles). Who knows. Just drive as usual and wait for it to clear.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.