Reply to Thread

Message:: [QUOTE="Anonymousproxy, post: 12289868, member: 160621"][ATTACH=full]446897[/ATTACH] Having another problem with this ###### apu. When hitting the start button it’ll go to the usual “preparing to start” message(or something similar, but after a few seconds or when it’s about to crank over the controller will go completely out without any engine cranking.  I’ll start the truck and run it awhile then the controller will light back up as if it was rebooting. Tried to restart it again and it’ll do the same thing.  I pulled the battery cover and looked in other places and nothing was loose. Also pulled covers on the apu and hvac box sane thing, all fuses still good, and hitting the red button on the generator dies nothing. I’m pretty much ready to take a sledgehammer to the #### thing.[/QUOTE]