Cummins Emissions Columbus, IN

Discussion in 'Shippers & Receivers - Good or Bad' started by JoeyJunk, Apr 23, 2019.

  1. JoeyJunk

    JoeyJunk Road Train Member

    1,131
    2,574
    Dec 31, 2010
    Washington, PA
    0
    I show up at 1400 for a 1700 appointment. Come back closer to your appointment time. OK

    Come back at 1630. Put me right in a door. It’s 1737.Haven’t even put the dock plate down. But I’m latched onto the building. Safety first for nothing going on.

    Must be shift change. Got 3 LTL guys hanging out as well. IMO shift change isn’t a good reason to not load. If you set appointments at shift change, stagger the swap times so there is always a few loaders.
     
    Last edited: Apr 23, 2019
  2. nikmirbre

    nikmirbre Road Train Member

    2,608
    2,852
    Jul 27, 2011
    Concord,NC
    0
    So you’ve been there almost 24 hours? You came back at 1630, then say it’s 1537......
     
  3. JoeyJunk

    JoeyJunk Road Train Member

    1,131
    2,574
    Dec 31, 2010
    Washington, PA
    0
    Whoops. 1737. Fixed it
     
    nikmirbre Thanks this.
  4. JoeyJunk

    JoeyJunk Road Train Member

    1,131
    2,574
    Dec 31, 2010
    Washington, PA
    0
    Clean facilities I’ll give them that. Even had a guy sweeping the leaves and debris from under the docks and between trailers
     
    nikmirbre and bzinger Thank this.
  5. nikmirbre

    nikmirbre Road Train Member

    2,608
    2,852
    Jul 27, 2011
    Concord,NC
    0
    I’ve picked up a big compressor from there years ago loaded pretty quick. But construction company loaded me....
     
    JoeyJunk Thanks this.
  6. JoeyJunk

    JoeyJunk Road Train Member

    1,131
    2,574
    Dec 31, 2010
    Washington, PA
    0
    This is a one way in one way out facility. They do most of the loading in the 6-7 doors you pass to go check in. Makes sense.

    I also find it funny I’m picking up a load of something very few people like or want LOL
     
  7. JoeyJunk

    JoeyJunk Road Train Member

    1,131
    2,574
    Dec 31, 2010
    Washington, PA
    0
    Update: dock plate is down. Not being used, but it’s down. Maybe I should see if they need help understanding the loaded forklift goes over that ramp into the trailer.

    Now I’m just getting stupid. This day is throughly shot in the keister
     
  8. JoeyJunk

    JoeyJunk Road Train Member

    1,131
    2,574
    Dec 31, 2010
    Washington, PA
    0
    Talked to the shipping clerk. Guy on radio says sorry they got slammed. o_O

    Yes. Slammed by loading/unloading everyone but me.

    Bathroom is nice. Toilet isn’t powerful enough.
     
  9. JoeyJunk

    JoeyJunk Road Train Member

    1,131
    2,574
    Dec 31, 2010
    Washington, PA
    0
    They figured out the dock plate finally.
     
  • Draft saved Draft deleted