Hello I am going to do an overhaul on my 12.7 series 60 Detroit and I have a remanufactured (less than 20k miles) Detroit s60 14 liter head laying around. So can I put the reman 14L (ddec5 ) head on the 12.7L (ddec4)engine. I heard that it will bolt up but I would have to use : 12.7 camshaft, 12.7 rockers, 12.7 jakes, the 14L injectors.
Can anyone tell me if this seems right? I’m assuming I would adjust the overhead based on the 12.7 specs? Also if I use the 14L injectors will it work with the 12.7 DDEC 4 ecm. If it will work do I just cut the connector off the 14L injector harness and solder them to the original 12.7 injector harness ? Btw the 12.7 is non egr and the 14L head is egr
Detroit 12.7 with 14l Head
Discussion in 'Trucks [ Eighteen Wheelers ]' started by Detroit series60, Dec 9, 2020.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
im not 100% sure but i dont think the injectors will work with the dd4 ecm as far as bolting the head on yes it will fit the 14 liter rockers and jakes should works fine use the 12 cam
ibcalm19 Thanks this. -
-
Detroit series60 Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.