Detroit 60 Columbia no cruise, I can see the ecm is seeing the cruise and Jake switches correctly, I can see the park brake is switching in the ecm as well as the foot pedal for brake is working in the ecm. What in the world am I missing?
Detroit 60 2001 Columbia no cruise
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Transportauto, Oct 2, 2023.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
VSS Signal?
Rideandrepair Thanks this. -
Have yet to check that while driving however I can not rev it and let the Jake's bring it down also no high idle. These worked few months ago
Rideandrepair Thanks this. -
Clutch switch then. You should be able to hear it click, you can also watch it on the laptop
Rideandrepair Thanks this. -
Clutch switch
Foot brake switch
Park break switch
Jake switches
Cruise switches they all work.
I'm missing somethingRideandrepair Thanks this. -
VSS signal is about all that's left then. VSS should ohm in the 700-1100 range IIRC.
A loose output yoke can also allow the pulse wheel to stop moving long enough to interupt signal at the ECM, yet the speedo may not change.
Should be able to shake the driveshaft and see if it's looseRideandrepair and Bean Jr. Thank this. -
Rideandrepair Thanks this.
-
Rideandrepair and Bean Jr. Thank this.
-
Are you sure you checked the correct speed sensor? If your truck is like mine, the speedometer is not through the ecm. Speedometer worked. Jakes and fast idle. When I had the trans changed, they changed that sensor, and now it works.
Rideandrepair and Big Road Skateboard Thank this. -
Rideandrepair Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2