Hi,
Just started hauling lumber on an flatbed,tho most of the time im using a PITA conestoga i do use a regular open deck.I was wondering do the make a netting so to speak to secure on the end of the load to keep the lumber from walking out?
Flatbed Netting
Discussion in 'Flatbed Trucking Forum' started by mpow66m, Sep 9, 2023.
Page 1 of 2
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I put put a piece of dunnage very front and back, and on short lumber i'll cinch front and back too. Haven't had any move since then
-
As @Big Road Skateboard said, I put like a 2x4 of top and tighten the heck out of it.
-
If your hauling lumber lengths 8 ft. and longer just put 4 X 4 under the front / rear of the lumber on the ends of trailer. If your hauling 2 X 2 X 2's surveying markers tarp the load less problems on the receiving side.
mpow66m Thanks this. -
-
Yeah, definitely tarp
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2