So after driving it today. My real only complaint about the truck. I swear it shifts very slowly. I did see that it's governed at 71. Which according to my GPS is actually 70. Which is nice. Also unless it's because it's a 2023. Basically none of the safety stuff. Really nice truck minus the shifting thing.
Indian River
Discussion in 'Discuss Your Favorite Trucking Company Here' started by Tanker_82, Oct 30, 2016.
Page 401 of 423
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
“Tanker programming” to where the trucks don’t skip gears.
-
Did you shut it off, let the instrument cluster black out, then open/close the door before restarting it when switching from an empty tank (or bobtail) to a loaded tank? I was told by our former shop manager a few years ago to do that so the truck will know if it’s loaded or empty. I think it adjusts the shift timing similar to the tow/haul mode button in a regular pickup. I might be wrong, though.jarhead0311 and navypoppop Thank this.
-
I've never heard that but will have to try and see if it makes a difference.Friend, navypoppop and Tanker_82 Thank this.
-
Only the new Kenworths have the lane warning stuff. I don't think they were even optioned that way by the company, it's just what was available at the time. They gave up on the extra warning stuff because they found it ade no difference to accident rates.Friend, navypoppop and Tanker_82 Thank this.
-
I've taken juice to Ontario before but the two places I delivered to were drop and hook. Maybe they have a new customer requiring pumping.
Friend, navypoppop and Tanker_82 Thank this. -
I hadn’t either. I was out back on the clean tank line one day and overheard him emphasizing to a new driver who had just finished orientation to always shut the truck completely off and start it back up anytime you’re swapping tanks because of the newer transmissions being able to sense the load. That was how I got in on the conversation and learned about it. I tend to think it does shift better, but sometimes it’s not that noticeable. It feels like it grabs the next gear quicker and doesn’t bog down and want to hesitate when I’m doing a loaded turnaround in a parking lot or making a sharp turn. I Googled “Pete 579 adjusts shift timing loaded or empty” just out of curiosity to see what popped up. This is what it came back with:jarhead0311, Redtwin and navypoppop Thank this.
-
So I really need to figure out a safe way to climb the tank with my rubber hammer. I was able to by shoving it into my pocket. But that only works if my pocket is big enough. Because today I realized I should make sure the some is tight. Which each ear or whatever you call it on a whiskey tank moved a little with my smacks.
Friend Thanks this. -
You don't wanna tighten them that much. They're supposed to be hand tight. Tightening them too much squishes the rubber gasket and could cause the dome lid to leak.Lonesome, jarhead0311, Tanker_82 and 2 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 401 of 423