I'm not a heavy duty mechanic.
I'm curious about a dyno report on a truck I'm looking to buy.
The engine is a 2019 MX13 rated at 455 hp. I'm unsure what the rated torque is. It's also mated to a 12 speed automated and 2.64 rears.
Max corrected hp at 1402 rpm was 363 and max corrected torque was 1365 at 1290 rpm.
For those of you familiar with this motor and dyno numbers for it, are these numbers reasonable or should I run?
MX13 dyno results
A 500HP Volvo D13 delivers around 400HP on the ground with a 12 speed AT2612 direct drive tranny and 2.64 145/40 Meritor rear ends.
MX13 455HP should deliver a 364HP recorded power to the ground.
I hope this help you.
Will an oil sample be accurate after an oil change?
Trip report? I do have, at least, a partial ecm report that looked pretty good as far as total engine hours and fuel economy numbers go, but doesn't show any aftertreatment history in it. Is this what you're referring to? I may be able to get a complete report. Actual average speed is slightly better than 42 mph with all idle time.
Average Speed....... 049 MPH Fuel Mileage........ 00008.13 MPG
Total Distance...... 0434409 Mi Driving Mileage..... 00008.44 MPG
Moving Mileage...... 00008.44 MPG
Engine Time......... 010275:05 H:M
Driving Time........ 008780:46 H:M Intertrip Idle Time. 001405:54 H:M
Moving Time......... 008097:31 H:M Intertrip Idle Pct.. 013.68 %
Total Active Time... 036593:01 H:M Short Idle Time..... 000803:17 H:M
Short Idle Pct...... 007.81 %
Over RPM Time....... 000001:32 H:M Extended Idle Time.. 000602:37 H:M
Over RPM Percent.... 000.01 % Extended Idle Pct... 005.86 %
Over Speed Time..... 000000:16 H:M Auto Fault Check.... N/A
Over Speed Percent.. 000.00 % Possible Faults..... 000108 #
Excess Speed Time... 000000:01 H:M Extraction Date..... N/A
Coast Out of Gear... 000000:00 H:M User Fault Confirm.. N/ALast edited: Oct 7, 2022