When Headlights are not working the high beam indicator light stays lit even if I use the dimmer switch
No Headlights
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Michael 247, Jan 23, 2020.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Sounds like power is back feeding across the filaments in the bulbs due to no ground.
-
Thanks..I will check grounds tomorrow..
blairandgretchen Thanks this. -
I’ve had a dimmer switch or 2 go bad and do exactly like you discribe. No lights and indicator on. Had one go bad one time that turned lights out with high beams on and one high and one low would be on when it was on low beam setting. These were the old floor board mounted ones.
spsauerland Thanks this. -
Dimmer switch is on turn signal..I unplugged it but it didn't change anything..
SmallPackage Thanks this. -
I ran a Frame Ground Wire to the Ground Wires near Headlights..They are working now..Thank Y'all for the Help..
SmallPackage and BoxCarKidd Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2