Reply to Thread

Message:: [QUOTE="sprechnd, post: 3944304, member: 88203"]When I turn the key to the on position it shows a fault code "88" at one point and then just shows "N" for neutral. When I turn the truck on and its in neutral is has an "N" which alternates back and fourth with an "F". When I try to put it into drive the N changes to a 2 with the down arrow on the left of it also alternating with the "F". When its working that arrow is blinking and as my foot is on the brake pedal with all brakes released I can hear and feel the engine or transmission or whatever "activate" or whatever and then it shifts into gear. But now that little arrow to the left isn't blinking and just nothing at all is happening. My "Tractor ABS" light is also on and I think it may have something to do with it since when its working and I hear the engine/transmission activate the tractor abs light sometimes goes away. And right now the tractor abs light just stays on and nothing activates[/QUOTE]