Username:

Message:

<p>[QUOTE=&quot;craig_sez, post: 12369932, member: 124366&quot;]Im either haven a major brain fart or something im just not seeing...</p><p>Heres the scoop..</p><p><br /></p><p>+ probe on center pin of coax and - on the gnd side(with antenna still attached on other end)and i get nothing on the multi meter(as if i didnt touch probes)..</p><p>Gnd to gnd and then it reads all zeros...</p><p>Antenna bracket itself with gnd probe and postive probe to top side of ant stud and it reads 000 for a second then goes up to approx 118 ohms...</p><p>On tje center pin of coax to top side of antenna stud i get 2ohms but that # floats a bit cause i cant get them probs to stay in place very well..</p><p><br /></p><p>I do the same but with one probe on bracket and other on the threaded gnd and all zeros...</p><p><br /></p><p>I now move over to my analyzer and my resistence reading(r# depending on freq)goes anywhere between 42 ohms to 52 ohms but my resonance points(x#) are 5 or less off zero...</p><p><br /></p><p>What am i not seeing cause it seems my range is dwindleing...</p><p><br /></p><p>Weather here in eastern canada is still crap so not much i can do till it gets better but what in the name of god am i missing..[/QUOTE]</p><p><br /></p>

Your username or email address:

Do you already have an account?

• No, create an account now.
• Yes, my password is:
• Forgot your password?