Log in or Sign up
Forums
Forums
Quick Links
Search Forums
Recent Posts
Trucking Jobs
Truck GPS
Reviews
CDL Practice Tests
Schools
Freight Factoring
Trucking Insurance
Menu
Useful Searches
Recent Posts
More...
Find Trucking Jobs
Company Driver
Dry Van
Flatbed
Refrigerated
Specialized
Owner Operator
Regional Truck Driving
Dedicated Trucking
Tanker Driver
Solo Truck Driving
Local Truck Driving
Team Truck Driving
No Experience Truck Driving
Experienced Truck Driving
OTR Trucking
Intermodal Driver
Hazmat Driver
More Trucking Job Searches
⌄
Fewer Trucking Job Searches
⌃
TruckersReport.com Trucking Forum | #1 CDL Truck Driver Message Board
Forums
>
Tricks of the Trade-Occupation Specific Discussion
>
Flatbed Trucking Forum
>
Heavy Haul Trucking Forum
>
Which truck is best to pull a tanker?
>
Reply to Thread
Reply to Thread
Username:
Message:
<p>[QUOTE="aussiejosh, post: 12225197, member: 32680"]Well what hp is the engine rated at? Will you be driving in hilly, or mountainous conditions? If its very flat country you can get away from having to use a higher hp engine it will be a bit more sluggish on take off and take a bit longer to get rolling to hit top speed but it will still work, I've seen this proven at my most recent job where we where hauling around 130 metric tonnes of iron ore with trucks rated at only 550 hp, which is way to low for hauling that kind of weight however if it was flat country with short distances covered at lower speeds then up to about 15 th gear it still pulled ok, it was only when we got onto the highway and tried to get it up to top speed at 90 km per hour (55 mph) that it struggled, So you will find if you have at least 485 hp or higher it will be fine even up hills. And more than enough to run a pto pump. And when your watering roads if that's what your doing you'll be driving at much slower speeds anyway.[/QUOTE]</p><p><br /></p>
[QUOTE="aussiejosh, post: 12225197, member: 32680"]Well what hp is the engine rated at? Will you be driving in hilly, or mountainous conditions? If its very flat country you can get away from having to use a higher hp engine it will be a bit more sluggish on take off and take a bit longer to get rolling to hit top speed but it will still work, I've seen this proven at my most recent job where we where hauling around 130 metric tonnes of iron ore with trucks rated at only 550 hp, which is way to low for hauling that kind of weight however if it was flat country with short distances covered at lower speeds then up to about 15 th gear it still pulled ok, it was only when we got onto the highway and tried to get it up to top speed at 90 km per hour (55 mph) that it struggled, So you will find if you have at least 485 hp or higher it will be fine even up hills. And more than enough to run a pto pump. And when your watering roads if that's what your doing you'll be driving at much slower speeds anyway.[/QUOTE]
Your username or email address:
Do you already have an account?
No, create an account now.
Yes, my password is:
Forgot your password?
TruckersReport.com Trucking Forum | #1 CDL Truck Driver Message Board
Forums
>
Tricks of the Trade-Occupation Specific Discussion
>
Flatbed Trucking Forum
>
Heavy Haul Trucking Forum
>
Which truck is best to pull a tanker?
>
Reply to Thread