13 cascadia clutch safety switch

I am having to push my clutch several times to get the truck to start so I'm assuming the safety switch is going bad my question is there a way to bypass that switch if it quits working completely before I get the truck into a shop?

 

This was a known issue and if I remember correctly there was a bulletin put out to pinpoint the exact failure as there were other issues related to this complaint. As far aw bypassing I'm not sure as the truck "reads" top of clutch stroke and bottom of stroke.

 

that safety switch is going bad because of Chinese micro switch quality. actually there are two micro switches , one for starter and one for cruise. if you have multimeter and electric knowledge you can cut a wires short them together and start the engine.

 

I changed the safety switch . I also put new starter but the truck still don't start any help pls

 

Buy a real truck!

 

Did you get this fixed? I'm having the same problem

 

Did you fix the problem cause have the problem with my truck

 

can you help me please

 

Youtube " 3 ways to bypass ..." or something like that.

 

I noticed the same thing after a clutch adjustment. Before adjustment great no problem. After adjustment issues.