Omnitracs IVG

Discussion in 'ELD Forum | Questions, Answers and Reviews' started by d281833, Mar 26, 2018.

  1. d281833

    d281833 Heavy Load Member

    Joined:
    May 15, 2012
    Messages:
    881
    Thanks Received:
    919
    0
    So installed this thing but have noticed that it will just shut down on it's own and fire back up. Also it seems to have made the dash display a little do strange things but subtle enough that I question that it was there before. I was under the impression that these are passive units and shouldn't affect anything. Am I losing my mind here or do these IVG units have issues?.
     
  2. JJKid

    JJKid Medium Load Member

    Joined:
    Aug 17, 2014
    Messages:
    690
    Thanks Received:
    513
    Location:
    Chicago, IL
    0
    It happen to me twice since i've had it installed into my trk november. Restarts by itself... get that welcome/warning sign, and goes back as if if nothing happened. I'd say its probably your IVG unit, a defect if it's happening more then often.
     
  3. BoostedTeg

    BoostedTeg Road Train Member

    Joined:
    Jun 2, 2008
    Messages:
    1,855
    Thanks Received:
    3,463
    Location:
    Boise ID
    0
    Mine shuts down after the truck has been off for a few hours then turns back on whenever you turn the key to the on position.
     
  4. STexan

    STexan Road Train Member

    Joined:
    Oct 3, 2011
    Messages:
    14,963
    Thanks Received:
    29,156
    Location:
    Longview, TX
    0
    Some are set by the admin to power down after x hours, and restart every x hours to check for messages. But I doubt that's what's going on here.

    Sounds like loose power connection or thermal overload protection switching. Does it reboot immediately after shutting down or is there some elapsed time?
     
    Last edited: Mar 27, 2018
  5. STexan

    STexan Road Train Member

    Joined:
    Oct 3, 2011
    Messages:
    14,963
    Thanks Received:
    29,156
    Location:
    Longview, TX
    0
    I accidentally learned something about my Omnitracs IVG that was refreshing. It has voice recognition that can perform many tasks. One thing I hated about our setup is not being able to se all the different times remaining, such as on the 11, 14, and 70 without being stopped. All it shows you is the amount of time you can drive up to the minimum of the 4 different limits.

    I was listening to an audiobook yesterday, and some string of words activated the IVG and she asked what I wanted to know. I was like "shut up. Nobody's talking to you". and she said "goodbye"

    Anyway, the activation to get her attention is "Hello Omnitracs", then the command to get her to speak all remaining hours is "Available Hours".
     
    25(2)+2, Bank_Lbr and Makeajump Thank this.
  6. Makeajump

    Makeajump Medium Load Member

    Joined:
    Apr 19, 2014
    Messages:
    443
    Thanks Received:
    363
    Location:
    Texas
    0
    That’s pretty cool! Thanks!
     
  7. STexan

    STexan Road Train Member

    Joined:
    Oct 3, 2011
    Messages:
    14,963
    Thanks Received:
    29,156
    Location:
    Longview, TX
    0
    BTW tap on the Help icon (“?”) to view all the other command words/actions
     
    Makeajump Thanks this.
  8. GEPPETTO425

    GEPPETTO425 Light Load Member

    Joined:
    Dec 30, 2013
    Messages:
    91
    Thanks Received:
    73
    0
    WHERE can I find a simple user guide???
     
  9. d281833

    d281833 Heavy Load Member

    Joined:
    May 15, 2012
    Messages:
    881
    Thanks Received:
    919
    0
    Google
     
  10. Dieselboss

    Dieselboss Technology Contributor

    Joined:
    Feb 19, 2009
    Messages:
    1,648
    Thanks Received:
    1,365
    Location:
    DieselBoss.com
    0
    Simple videos for drivers: ELD Driver Videos

    Simple videos for Admins: ELD Admin Videos

    Full Documentation page: IVG
     
    25(2)+2 Thanks this.