Phasing driveshaft

Pete 579. All info says to phase driveshaft that the ears on both ends must line up. Dealer says some trucks set up at factory could be 90 degrees off each other like a Plus sign. Mine are about 40 degrees from each other. Think ill try the perfectly lined up method unless someone knows better on a 2016 579 pete.

 

Intermediate shaft between axles will look wrong and phased 45* from the factory and is correct.

Main drive line should be in line.

If you think its been moved have it balanced and marked. Driveshafts should always be marked on removal and put back just the same.

 

Well idk if it was 45 degrees , probly close but i put it straight in line ear to ear and no difference that i can tell. Same vibration. Especially when stopping

 

Driveline vibrations will not change when braking. You most likely have something going on in a wheel end.

Driveline vibrations will usually change accell to decell.

What did you find with your brake problem?

 

Front left hub wasnt centering drum correctly so new hub drum n shoes. Vibrates like hell when stopping

 

Ck that you have the correct drum for the new hub that you bought?

 

It is. The braking vibration from fromt wheel is gone. It was warping drums and isnt anymore. Just still have a shimmy somewhere behind the cab i cant figure out

 

Have you ck’d stabilizer bars from frame to Top of housing?

 

Nahh. Jus jacked her up n put it in hear and got out and these cheap ### chinese tires are all wobbling like crazy. Guess thats my vibration

 

Necessity is the mother of invention!!!!