08 Cascadia 14l Detroit series 60 problem

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by claytonr1973, Jan 6, 2020.

  1. claytonr1973

    claytonr1973 Light Load Member

    Joined:
    Jun 1, 2008
    Messages:
    266
    Thanks Received:
    289
    Location:
    miami,ok
    0
    08 Cascadia 60 series. Randomly all 3 check engine lights and the ABS light will come on for a couple seconds. The engine fan comes on, cruise turns off and the throttle is dead. I have to push the cruise button twice and then bump the brake and clutch pedal to get the cruise back. It does this while driving and at idle. When I start the truck when it's cold outside it will do it over and over in rapid succession until I can use the heater to warm up the truck so it seems to be temperature related. Some days while driving it won't do it at all and then suddenly it will do it over and over.

    Any ideas?
     
  2. QUALITYTRUCK

    QUALITYTRUCK Road Train Member

    Joined:
    Jun 14, 2009
    Messages:
    1,809
    Thanks Received:
    1,769
    Location:
    romulus,mi
    0
    J1939 datalink issue. Use the search box for info. Not for the faint of heart.......
     
    spsauerland Thanks this.
  3. Phil12

    Phil12 Bobtail Member

    Joined:
    Jan 7, 2020
    Messages:
    11
    Thanks Received:
    1
    0
    If your crankshaft sensor is two wire pull it out and clean it. Also clean the hole with a magnet and leave shim out if sensor doesn't hit reluctor wheel.
     
  4. rbrauns

    rbrauns Light Load Member

    Joined:
    Dec 7, 2014
    Messages:
    164
    Thanks Received:
    56
    0
    Did you ever get this issue sorted out?

    I had similar issues with my truck, also a 2008 Cascadia with a Series 60 and changing the engine wiring harness and all the sensors fixed it.