So my abs module just threw a bunch of codes and won't let the truck go into gear. I think it got wet or a connection bounced loose. Is the module anyplace accessible and can I just unplug it?
Try shutting the truck off,turn the master off,let it set a few minutes and retry.Our 2019's do it sometimes.Most of the time it resets,sometimes it doesnt.Maybe unplug the trailer too,see if it resets.
It's definitely a wiring issue. Had the same thing happen a month ago and I was hopping that something just bounced loose as I went through Indiana. It took me 4 youtube videos before I found the location and everything is plugged in, so I'm guessing when they made the repair they left a wire exposed or chaffing. Codes say 3 of the 4 wheel sensors and the brake pedal have low or bad voltage, plus two other things with "out of phase signals". Tow truck will be here shortly, but I was hopping to at least get out of the driveway.
Road salt got my starter last month,380,000 miles on the truck.Mechanic came out,tapped on the starter with a hammer while I held the key in start and if fired up .I didn't shut it off until I got back to our shop in Texas.
