Fixing tear in seat back fabric in a Peterbilt 579(?)

Discussion in 'Experienced Truckers' Advice' started by bentstrider83, Feb 13, 2023.

  1. bentstrider83

    bentstrider83 Road Train Member

    1,726
    1,645
    Dec 26, 2011
    Portales, NM
    0
    So after three years of driving the same truck, I was told that it's going to be getting switched out some time soon. I'm detailing/cleaning it as best as I can. But there's a couple of animal tears on the back of the seat. Not too big, but noticeable. Should I seek out a reasonable upholster guy in town and out of pocket to CYA? Or is there an easier way to patch up?


    Clown on me away.
     
    Flat Earth Trucker Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. ducnut

    ducnut Road Train Member

    2,570
    7,732
    Dec 31, 2010
    SPI
    0
  4. bentstrider83

    bentstrider83 Road Train Member

    1,726
    1,645
    Dec 26, 2011
    Portales, NM
    0
    As soon as I'm stopped again.
     
    ducnut Thanks this.
  5. Moosetek13

    Moosetek13 Road Train Member

    14,652
    18,392
    Nov 1, 2010
    Burnsville, MN
    0
    If the company allowed you to take the pet with you, it should be considered normal wear and 'tear'.
    Both dogs and cats have claws that might (will) snag.

    How are you with a needle and thread?
    A curved needle might make things easier.
     
  6. bentstrider83

    bentstrider83 Road Train Member

    1,726
    1,645
    Dec 26, 2011
    Portales, NM
    0
    Here's some pics. I'm not an expert at sewing. But I've pricked myself enough times I desensitized. I'll have to consider the wear and tear. There is a pet policy so I don't think I'll catch too much flack. But the guys at the local shop are some real PITAs about everything.


    20230213_224237.jpg 20230213_224227.jpg 20230213_224219.jpg
     
    RubyEagle Thanks this.
  7. RubyEagle

    RubyEagle Medium Load Member

    632
    788
    Apr 17, 2010
    0
    You can buy kits to fill that without sewing. I had a lady come fix one of my cars that.had a burn mark on it.she dabbed it with this glue and bits of fabric. Perhaps you could cut off a swatch from a hidden part of the sear, make a pattern out of the holes and fill them in?
     
    ducnut and bentstrider83 Thank this.
  8. lester

    lester Midwest's #1 Feed Hauler

    2,919
    7,878
    Jan 2, 2012
    NW, Iowa
    0
    Why are you carrying a giant crappy tarp?
     
  9. bentstrider83

    bentstrider83 Road Train Member

    1,726
    1,645
    Dec 26, 2011
    Portales, NM
    0
    It's a cheap seat cover so I could put my bicycle there without damaging the seat further.
     
    Last edited: Feb 14, 2023
  10. tscottme

    tscottme Road Train Member

    Be prepared to pay for the damage or pay someone to repair the damage. Nobody can tell you how your boss or the site manager at your location will handle your situation. They can tell you how some other person, at another company ONCE handled a different situation in 19xx or 20xx. If you pay for the repair MAYBE it will cost less than your compan MAY charge for the damage, or not. "Making predictions is hard, especially about the future."
     
    bentstrider83 Thanks this.
  11. ducnut

    ducnut Road Train Member

    2,570
    7,732
    Dec 31, 2010
    SPI
    0
    I’m wondering if a set of seat covers from Walmart might be the best option? That’s the first thing I do, when assigned a new truck. Coveralls have the nicest ones, but, a bit pricey.
     
    bentstrider83 and tscottme Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.