How to cleanly install coax in a 2014 Cascadia?

My Cb is in the upper console of my 2014 Cascadia. How do I cleanly install a coax and run it to the pass door and ultimately out to the mirror for an external antenna?The factory internal antenna just doesn't cut it. I have the bracket for the mirror and antenna. Just need coax and the correct way to install it. Keeping the coax out of sight. Thanks

 

Could take it into firewall.

 

I could. That's always an option. Thanks for your input and have a Merry Christmas!

 

Ya too my last company that's how I did it took dash screws out and ran it. Or put it on passenger side and run it through the door.

 

Did u run the coax down the middle of the windshield? My Cb is up high. I wanna keep the coax up there

 

I got a 2011, I pulled the trim off the driver's side pilar and ran it down there for an easy clean look.
But then I got lazy and just ran it out through the door seal to get to the mirror mount.

 

Is it antenna on the drivers side. I'm putting mine on the passenger side.

 

Yeah, mines on the driver's side. On this truck with the handle bolted to the passenger side pillar it would be harder to hide the wire

 

OK. I'll have to have a look see. Might be better that way.

 

It's all Cat's and Dog's in here!