Light Control Module in high voltage mode.

Discussion in 'Volvo Forum' started by xiipercent, Aug 16, 2014.

  1. xiipercent

    xiipercent Medium Load Member

    Joined:
    Mar 19, 2007
    Messages:
    456
    Thanks Received:
    129
    0
    Ok, scenario.

    Truck was parked for 3 months.

    Brought it back into service, batteries were still solid and reconnected all power and ground wires.

    Week 2 , the trans battery wire had poor connection. Stopped shifting. Replaced ring terminal, cleaned connection... all good.

    Now, since week 2, I've been getting this LCM hi voltage warning. It turns off the ac, DID flashes warnings.
    It has been intermittent. Once it came on and engine fan instantly came on. By the time i got a safe pullout,it had gone off. No errors.

    however, i need to figure which wires to inspect for abrasion/connection issues. Any guesses?
     
  2. baha

    baha Road Train Member

    Joined:
    Jul 25, 2013
    Messages:
    4,137
    Thanks Received:
    2,837
    Location:
    ga
    0
    CK. the ALT. to see what voltage it is giving out, reclean all ground wires
     
  3. driver442

    driver442 Bobtail Member

    Joined:
    Oct 12, 2014
    Messages:
    7
    Thanks Received:
    0
    0
    Check your Fuse on the Battery harness , corrosion had built up cleaned it replaced the fuse no problems .