thanks big road.
hi! Can someone please help me out understanding this fuel flow diameter. This is a fuel fitting located on the rear of the engine. Its inner...
you are right. Not needed at all, but there isn't any drawbacks for an additional filter. right?
why not?
Detroit diesel series 60 12.7 additional fuel filter mount. Pressure tested. Installed on the fuel intake side (tanks to engine) before Davco 382...
Hi. Does anyone know how to get cables out and in out of this type of connectors? please see images below. thanks. [ATTACH] [ATTACH]
I don't know much, but give this a try please take a look at this link: DD15 EPA10 Engine Sensor Locations | DD15 Troubleshooting Locate sensor...
you are right. It was fixed in place hard. I did not want to hit it with a hammer, so I soaked it in wd40 and left it for a few hours and it did...
Hi. Does anyone know how to remove a vibration damper. After removing the screws, it seems that a pulley is needed. Damper does not come off by...
dd13 cascadia. Nothing wrong with emissions. Truck uses a fuel catalyst made by pittsburgh power. Rarely does a regen lately. I was attempting to...
does anyone know what this is? It also asks about a Vedoc's key? does anyone know where the vedocs key is located? [ATTACH]
****update**** 08/02/2021 Oil spinner stop spinning. Reasons unknown, but it is suspected that the air selenoid "clutch", which is located at air...
Felix. I don't know much about your issue, but it seems like you may what to check the air hose going from the VPOD to the turbo AIR PRESSURE...
voodoo LOL
what company?
***UPDATE*** Found the cause of the moist build up. Apparently, The mixer pipe, which is the pipe that follows the venturi pipe towards driver...
For those of you that think about using a leaf blower please consider that a blower will agitate particles high above your shoulders and after you...
Vitaly. Don't look at the pump pressure. It is kind of meaninless. Look at the DEF amount requested vs DEF pumped if you want to try to diagnose...
Do not take my word as final, but I have done some research on that code and some people say it is the water in fuel sensor.
Have you ever thought about making those holes bigger? A fraction of a millimeter. What do you think would be the effect? A Venturi pipe used on...
Separate names with a comma.
