A little water in the fuel will make for hard starting. Have you checked the fuel filters for water?
What is that like a supply line that keeps air pressure fed to the bag? What size is that line? I would think at least a 3/8".
I once was losing a great deal of air but never could find it. Turns out it was the main line going from the compressor to the dryer 1st. That...
Is it winding fast and taking a long time to start or winding slow? If its winding slow you might have a parasitic draw draining down the...
We always just screw quick couplers into the air tank just like you would see on your shop air to where you can plug your line in and air up a...
If your gonna go with stick shift NewTruckieGirl, Id look for trucks with 8LL transmission's and drive them to make sure they have good highway...
Thanks for the comments everyone. I finally got the chance to flip the yoke 180 degrees a couple hours ago just to see if my assumption was...
This is some very helpful info Gear Head! Our 96 Pete's 357 AC had been working great with one exception, it would freeze up and have to be shut...
We have a 96 Pete 357 Dump that had great air when it was new but for years we havent been able to get it working good without it freezing. The...
After 3 Pre cooler failures in 1.5 yrs I decided so I can keep running and not be down to route the coolant outside of my 2 month old failed pre...
That open ended hose should be the overflow. Try tracing it back to the radiator cap. If its the overflow try a new radiator cap. If the cap works...
Folks love the Western Star 4700's around here. They come with Alison automatics and will haul buggy! Even fully loaded they will take off faster...
Thanks I'll try that. I can't get the nut off now. It was loose when I took it off 1st go and when I put it back on with red loctite sparingly, I...
Ok I might have to look into that bearing. I found out last night the shaft definitely has some wobble to it. With some vice grips I clamped a...
Are yokes balanced from the factory? I took one off to install a carrier bearing on my T800 and now have vibration from 35 MPH to 47ish MPH. The...
Really? Guess I'm on my own with this one?
Have I lost my mind here? I've looked at the ratios and it seems as though almost every thing in the ratios are very close except that the 18 has...
We have a 96 Pete 357 that does the same thing and Im guessing that if both sets of wheels were off the ground to where it could be run up to 45...
When adding a little freon there is a sweet spot to achieve. If you go past it and over charge the system vent temps will go up. You can pick up...
Hi AmodelCat and SL3406! Turns out I had a bad bearing in the output shaft coming from the Transmission. I could push up on the yoke right at the...
Separate names with a comma.
