Freightliners were called Freightshakers before air ride came in, I worked at a dealership and with a guy that did interior work, he did have...
Take a test light and check for power to the horn when someone pushes the button. The power comes up the steering column, and comes out thru the...
You have warranty it could be the selector in the transmission is sticking or the pressure regulator is low, the dealer has experts, let them look...
What we use to do is advise the driver to let the fuel tank run low, bring it in then remove the return lines and fittings from the unit checking...
I was at the Freightliner factory and they were making the tank recovery trucks they had a 3/4 inch main frame and a 1/2 in insert. You can get...
There is a tag on the engine that tells you the amount of fuel it takes to develop the advertised HP in MM3 what ever that is? I rebuilt engines...
Do not play with it, put in a remand, file the preasure pipe to the block connection flat Use synthetic oil to install the pipes, on the "O" rings...
If your system is draining back it will be hard to start, the system needs a check valve, when I do filters I fill them first, drain the oil and...
I worked at Freightliner and the law is that the glider gets a new serial number so it must pass all emissions, brake and every other law that is...
One thing you could test is the speed sensor on the back of the transmission, if you have a Ohm meter, test both coils one should be around 900...
I worked at a dealership and the best way to increase power is a fuel cooler, in the return line, in the winter, you make a cover for it. As I...
If you take an engine that is made to run at 350 HP and boost it to 450, you will lose fuel economy as the engine is not made to run that HP, if...
People that believe what the Kock brother preach is why the USA scored second place in the whole world in the ignorance survey, Italy was #1 The...
The calibration code is the speed the solenoid reacts, it has nothing to do with fuel rate. when you change the codes to all 75 it just starts the...
You want to have the CAC tested and have them put the test plug in the right side first to check the complete system, intake manifold, the piping,...
The wiring diagram for an N14 shows the sensor and it going to #11 in the OEM connector, Every N14 I have worked on uses the sensor in the bell...
You do want to check with the Highway patrol or the licencing guys to find out if there is a HP requirement for a "B" train, 400 is not legal in...
Wore out you were right on the N14 front cover I could not find the thread, It must have been a case of oldshimer. I went to the shop and there...
The check valve is in the ECM cooling plate. I have seen pumps put out 155lbs and you do not want to have the guage top out. I also have a...
I would be calling Detroit, or the local Detroit representative. There are thousands of those motors out there and it sounds to me like someone is...
Separate names with a comma.
