Bells cb and screwdriver radio tech?

That audio is coming out of a monitor radio on his bench, it's not the radio's talkback

 

Ooohhh, Ok. Well then I guess I'll find out when I get it hooked up.

 

The only problem is 99% of the guys that lockdown parking lots disappear out of my receiver 10 miles down the road and when I get 20 miles down the road I can still hear the guys on the stock Cobra 29's complaining about the guy in the parking lot with the big radio.

 

3:00 position on the mic gain is not low that is 3/4 just start there and see what kind of reports or feedback you get, I generally keep my mic gain about 3:00.

 

Gotcha. Im used to having my stock 29 LX turned all the way up. I'll get someone to help and start at 12:00.

 

I'm sure the OP has long since unsubscribed from this thread but like I did, maybe others will come across this as they research techs. So as promised, my final review.

While I stand by my post regarding their customer service, I will concede to Rabbiporkchop and others here. I can't recommend getting any kind of tune up from them. At $425 for a 98vhp the pricing is great but the $40 "tune up"... don't waste your time unless your only goal is to be the big radio in the parking lot because that's all you'll be.

Here's my splatterbox:
(As for the Captain Morgan bit, don't ask.. Lol. Oops.)

 

Jeez that's bad. To think I used to recommend them before I knew better...

 

This is one of those situations that no matter where you set the mic gain knob it's impossible to get rid of the harmonics.

 

Yup, I'll take clean and mean.

 

When he gets done with it you'll be able to run the mic gain wide open with no harmonics