Running with JCT, Part Deux

Over Idle is the percentage of time the engine idled. In this case, it was 2 hrs 33 min.
Over Speed is the percentage of time over a preset limit. I think its 68 for us.

 

Over speed is anything over 68 mpg.
Over idle is anything over a few min warm up / cool down. Haven't figured out exact time frame though.

 

Yep and if you look up the excessive speed that is set at 72.

 

I just noticed that you had an over RPM what is the set RPM on the trucks?

What do you find the best operating range for optimum performance?

 

There is a 3 minute idle period and a 5 minute period. Not sure when the clock starts. I used to have less than 0.5% each week, but since I'm cooking in the truck, I have to idle to run my appliances.

 

The over RPM is set at 1800 RPMs. The optimal range in the 2014 Cascadia Evolution is between 1100-1300 RPM. They tell you 1400, but I disagree. I consistently have the numbers to prove it each and every week.

 

Over RPM is anything above 1500 rpm
Idle is set at 3 - 5 mins before it counts as idling.

 

Camaro, the RPM is 1800

 

When you are in the SensorTRACS screen click on performance and then click on Violation Reports and it will show you what everything is set at. It will also show how often you are over in each category. LoL mine ain't to good cause I keep forgetting this Freightshaker don't control your speed like my old Volvo did.

 

Mine is set at 1500