Support Thread for the TND 500, TND 700 or future Rand McNally products. (part two)

No, you will see part of the mount. Design issue.

Thanks,
Mark

 

Always try to add 15% to the distance on the POI searches and it will get you in the ballpark. When you do the searches no route is calculated since if you tried to calculate a route to every POI search it would take time in processing.

Thanks,
Mark

 

Thanks, but until it is released as construction done HERE will not show it as a valid road.

Thanks,
Mark

 

Yes, 8gb, class 10, you will see a 10 on the card. faster read/write. Just a note, do not use Ultra/Ultra Plus. The way the file structure is written on these cards will cause read/write errors on the map files.

Thanks,
Mark

 

Just a note,, NC, I-77 mm 28 to mm 23, both N/S one lane will be closed from 10pm to 5am for a while. They are adding a toll lane.

If you are taking I-85 and need to get to I-40, take exit 17 (I-85) and take US-321. Four lane road. Just beware of the drop of 65mph to 55mph when you get to a few miles of I-40.

Thanks,
Mark

 

Make sure you get the latest version update. If you do, please call Customer support and let them know you are on the current version and your 730 still locks up. A reset will not fix it. If in warranty they should replace.

Thanks,
Mark

 

I replied to your PM about this.

Thanks,
mark

 

Bad hardware. Call Customer Support and let them know you have a bad screen on your 730.

Thanks,
Mark

 

It depends on the load. I had to run sometimes with them all the way forward. As for the tractor, they have to find generic pictures to show.

Thanks,
Mark

 

Is the screen something I can reattach to the motherboard?