09 D13 loses power pulling, no codes

How many miles did you truck have one it?
Thanks

 

Hi have same problem Mack MP8 I'mchange fuel housing 6 injectors with cups still have issue with power when polling .my injectors not paire with ECM because dealer don't want them.to paire Def deleted. Where I can look for missing power . Thanks

 

I'm have same problem with Mack MP8 engine .also deleted and no power .change fuel housing oil housing and all 6 injectors but still same no power . Any clue what can be . Thanks

 

The engine modifications are inhibiting the fault codes. I'm sure there are plenty codes.

 

Had the same happened to a friend of mine his truck is deleted d13 and lost fuel mileage only with a Volvo ptt software it showed me that turbo actuator was stuck open no codes on a dash due to non oem programming. I believe his truck doesn’t even have a diagnostic sub menu on a dash anymore.

 

Yes it's no showing any codes .and it's hard to geuss and change all parts .thank for advice I'm was thinking it so e sensor for turbo boost.

 

Hi there,I have same problem, with Volvo Vnl730 D13 I-shift, it started after I changed the oil,and leveling valve. Before was fine no problem, Issue happens after driving about 60 miles speed goes down and gas pedal doesn’t respond no rpm, I have to pump the gas pedal and it’s slowly shaking and keep driving , then after few miles it repeats again, no engine light or fault codes, sometimes check transmission message pops out, I went to Volvo they said inactive bunch of faults related to transmission, already changed the boost sensor and fuel filters, turbo works fine, any idea please help.

 

Sorry man, a year later and I’m still having this problem. After spending thousands I gave up On the Volvo and bought a Kenworth with a Cummins. At this moment I’m stranded in Memphis with a derate. Smh no one has posted a fix for the same problem.

 

I had an issue similar to it and I'm not sure the correct name for the sensor. But it was on the turbo charger pipes(Passenger side) the probe sensor was loose I tightened it and it seems to work. Hope this helps.