Sprinter van on cx-6 cx-7
Discussion in 'Car Hauler and Auto Carrier Trucking Forum' started by 05vnl670, Mar 27, 2020.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
CX7 is the model but if you have MST it means you top rear deck is split, (Middle Split Top= MST)Kozakvod Thanks this.
-
I've hauled them on a highrail. Pain in the ### but they'll fit. Depending on which direction you point them you can get below 14 ft
-
It’ll be under 14 for sure, only time it’s 14 or so is with an AC unit on van that’s on the tractor. On a highrail lift the front of the rear van that’s split decked and it’ll drop the ### end of the 1st van loaded on the trailer to drop the camera on the top rear below the rail. The Dodge Ram ProMasters are the same maybe lower just have wide ### mirrors even when folded.
Attached Files:
-
-
On the CX-7 it would be a similar concept. You can split deck the 2 vans like if you have 2 pickups so the first one on the trailer will drop more when you raise the rear of the middle deck or you can just back it on and go out the back door if needed.
05vnl670, Kawinige01 and Banker Thank this. -
Pretty easy to figure out, the HTs are roughly 112" tall what is your collapsed deck height
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2
