The other project I had this weekend.
Fixed the hood on my buddies w900. Is it the right way? Prolly not but its better that the nothing that it had before.
#### thing had a 2x4 under the pin to raise it enough to touch the hood. Took that out and put it where it belongs and rebuilt the hood structure and put the brackets on lower so the adjustments are actually usable.
Where is everyone #5
Discussion in 'Flatbed Trucking Forum' started by DDlighttruck, Aug 27, 2017.
Page 12962 of 20303
-
Swine hauler, Brettj3876, SAR and 10 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
singlescrewshaker, SAR, jamespmack and 5 others Thank this.
-
Last edited: May 3, 2020
cke, singlescrewshaker, SAR and 5 others Thank this. -
cke, singlescrewshaker, SAR and 6 others Thank this.
-
The T800's in the bush have a nasty habit of the 1/4 fenders wearing thru the hood fenders. Seemed like every spring you'd have to fiberglass the hood fenders. I think we even fiberglassed a piece of wide 1/8" thick flatbar into one guy's hood fenders.
cke, singlescrewshaker, SAR and 7 others Thank this. -
I bought 4 brand new batteries 5.5 years ago to start my KW. Put them in my can like 3 years ago and left them there. Pulled them out and figured I should charge them up. All 4 still had 11.5 - 11.7 volts after sitting 3 years.
cke, singlescrewshaker, SAR and 6 others Thank this. -
cke, singlescrewshaker, SAR and 5 others Thank this.
-
cke, singlescrewshaker, SAR and 4 others Thank this.
-
This is why mirrors are on my car. Too avoid this.
Attached Files:
Wasted Thyme, Swine hauler, Brettj3876 and 10 others Thank this. -
-
Correction: it may have been a FF961.Last edited: May 3, 2020
Swine hauler, cke, singlescrewshaker and 7 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 12962 of 20303