Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Wont start

Discussion in 'Freightliner Forum' started by dann10421, May 16, 2020.

  1. May 16, 2020 #1
    dann10421

    dann10421 Bobtail Member

    4
    0
    May 16, 2020
    0
    I have a Detroit 60 motor in my freightliner(glidder). Engine is rebuilt 1994 on 2017 chassis. I got a pm service and had them change the srs and trs sensors. Now my truck runs like crap for 1 min and shuts off. Mechanic says he got air in the lines by leaving the fuel filter cover off too long (30 min). Any ideas? I'm still waiting on it to run right.
     
    dann10421, May 16, 2020
    dann10421, May 16, 2020
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. May 16, 2020 #2
    AModelCat

    AModelCat Road Train Member

    27,708
    145,156
    Jul 7, 2015
    Canuckistan
    0
    How long have you had it running? Air should purge out pretty quickly.

    Any chance there's an adjustment for the gap on those sensors? Wires/connectors weren't damaged when sensors were changed?
     
    AModelCat, May 16, 2020
    AModelCat, May 16, 2020
    #2
    blairandgretchen Thanks this.
  4. May 16, 2020 #3
    dann10421

    dann10421 Bobtail Member

    4
    0
    May 16, 2020
    0
    Not that I'm aware of. Pretty much a single bolt on each sensor and plug and play.
     
    dann10421, May 16, 2020
    dann10421, May 16, 2020
    #3
  5. May 16, 2020 #4
    dann10421

    dann10421 Bobtail Member

    4
    0
    May 16, 2020
    0
    Shows "eco 128" and engine light is now on.
     
    dann10421, May 16, 2020
    dann10421, May 16, 2020
    #4
  7. May 16, 2020 #5
    dann10421

    dann10421 Bobtail Member

    4
    0
    May 16, 2020
    0
    Ecu 128
     
    dann10421, May 16, 2020
    dann10421, May 16, 2020
    #5
  8. May 16, 2020 #6
    QUALITYTRUCK

    QUALITYTRUCK Road Train Member

    1,779
    1,725
    Jun 14, 2009
    romulus,mi
    0
    Easy to get those sensors mixed up. One is slightly longer than other.
     
    QUALITYTRUCK, May 16, 2020
    QUALITYTRUCK, May 16, 2020
    #6
    blairandgretchen and AModelCat Thank this.
  9. May 16, 2020 #7
    skellr

    skellr Road Train Member

    8,737
    12,179
    Jul 17, 2011
    The Village, Portmeirion
    0
    Look on the side of the motor next to the fuel filter for a hand pump.

    Might need to turn it counter clockwise to pull it out. Pump it untill your arm falls off... Then do it again.

    If it starts, rev it up high for 3-5 minutes.
     
    skellr, May 16, 2020
    skellr, May 16, 2020
    #7
    RocketyMan Thanks this.
  10. Mar 28, 2022 #8
    Frankpod

    Frankpod Bobtail Member

    7
    0
    Mar 28, 2022
    0
    Freightliner 2008 Columbia
    Detroit Series 60 14L
    I haven't driven my truck for a week, and it won't start.
    I get the following:
    ECU 128
    sid 248
    fail 09
    someone who can help me?
     
    Frankpod, Mar 28, 2022
    Frankpod, Mar 28, 2022
    #8
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.